SINGLE – The all-rounder for your floors
Do almost all floor work with just one machine
The single-disc sander SINGLE is a true all-round work horse. With its powerful motor and maintenance-free metal gear drive, the single-disc sanding machine is designed for rough work all the way up to fine sanding.
Thanks to the ergonomic design it puts less stress on your body. The ability to connect an external vacuum system comes standard on the machine housing, allowing you an almost dust-free operation. .
Discs for the SINGLE
The universal disc
Standard with the SINGLE.
With the universal disc, wood floors can be sanded, oil applied and floors cleaned. The construction of the disc allows the attachment of Velcro sanding discs, pads, screens, double sanding discs and any other bolt on abrasives.
The Milling-disc with
The milling disc for the SINGLE was designed for rough subfloor work. Recommended for removing old felt floors, floor covering leftovers and carpet back residues.
The sanding disc with
DIAMOND abrasive segments
The diamond segment grinding disc celebrates its debut in December 2017. It was designed for subfloor preparation. Its field of application lies in the removal of old filler, stubborn tile adhesive residues and sanding screed.
LÄGLER® project: Subfloor preparation for new parquet install
Rip out old parquet | Refurbish subfloor | Prime subfloor | New install
When faced with a glue down parquet and a new install you are inevitably confronted with subfloor refurbishment. In many cases, this is very time consuming. A new floor can only be installed when the subfloor is refurbished and prepared. With our new sanding disc with diamond sanding segments, subfloor work is now faster and easier.
In order to be able to test our diamond sanding disc for the SINGLE under real conditions, we were again looking for an interesting renovation project this year. One led us to Hockenheim. Here we came across a house with about 90 m2 / 970 ft2 of living space from the year of construction in 1962.
On the ground floor of the house a mosaic parquet was installed in a cube pattern, which had very high indications of wear. On closer inspection, we even discovered old, deeper sanding marks that came from an earlier renovation. Loose parquet blocks made us decide to completely reinstall the floor.
Our approach in detail:
1. In the first step, we removed the old parquet with a pneumatic lance/chisel and cleared the room.
2. Immediately afterwards we sanded down the old adhesive residues with the SINGLE and the diamond sanding disc. This work progressed quickly, so that after a short time all adhesive residues were eliminated. By using the diamond sanding disc, we were able to level the screed floor.
3. In the third step, the floor was vacuumed thoroughly with a vacuum cleaner of dust class H.
Laminate was originally laid in the upper floor of the house. This was to be replaced at the request of the owner for a real wood parquet floor. When tearing out the laminate, we encountered old filler residues on the subfloor that was perfect for using the diamond sanding disc.
Conclusion for the subfloor refurbishment with the SINGLE and the diamond sanding disc:
With our powerful SINGLE and the diamond disc, we tested the versatility of our latest development on a real construction site. In our experiment, the single-disc sanding machine and its new sanding disc for subfloor refurbishment was proven to be very successful.
Old adhesive residues and filler residues were easily sanded off. By connecting an external vacuum system and the use of the sealing Velcro we were able to work almost dust-free.
After vacuuming the subfloors, we were able to start immediately with the application of PU primer, so that after the manufacturer-recommended drying time of the primer the new install could be started.
LÄGLER® 2018 at DOMOTEX, Timba+, HolzHandwerk and NWFA-Expo
DOMOTEX 2018 | 12.01. - 15.01.2018 | Hannover
Every year »and a little different every time«
Also in 2018, we will exhibit our products at the DOMOTEX - this time with live demonstrations of our new DIAMANT sanding disc.
Please ask for the exact times at our booth.
DOMOTEX 2018: Hall 13 | Booth D 46
In January, we will celebrate »10 years of PREMIUM SANDING TECHNOLOGY (PST®)«. More than 2,500 companies have participated in our seminar ever since. Therefore, we prepared a little surprise for our booth visitors.
We also hope to welcome you.
Timba+ 2018 | 24.01. - 27.01.2018 | Salzburg
A new adventure with the Timba+.
From 24.01. - 27.01.2018 the Timba+ opens their doors for the first time and LÄGLER® will be there. We will also present our products in Salzburg. We hope to welcome many customers and friends to the fair for our live demonstrations.
Please ask for the exact times at our booth.
Timba+ 2018: Hall 10 | Booth 320
HolzHandwerk 2018 | 21.03. - 24.03.2018 | Nürnberg
The HolzHandwerk welcomes us again.
Every two years we exhibit at the HolzHandwerk. 2018 it is finally time again. In Nürnberg we celebrate our »10-year PREMIUM SANDING TECHNOLOGY (PST®)« and introduce our product novelty live. We look forward to interesting discussions and a few great days with our trade fair visitors.
Please ask the exact times at our booth.
HolzHandwerk 2018: Hall 12.0 | Booth 1004
NWFA Expo 2018 | 11.04. - 14.04.2018 | Tampa, Florida
DEEP DIVE - Make a splash in Tampa
The NWFA Wood Flooring Expo is focused strictly on the wood flooring industry and more than 3,000 people will attend, ready to see new product roll-outs and build connections. Lägler will celebrate its »10 years of PREMIUM SANDING TECHNOLOGY (PST®)« anniversary in Tampa, and will demo some of its state-of-the-art sanding technology.
NWFA Expo 2018: Booth 1301