The machine is exclusively delivered with this attachment. The handle positioned on the attachment makes it easier to guide the machine. If sanding is also to be carried out under obstacles, such as radiators, the attachment can be unscrewed for this purpose.
At the front of the attachment a velcro tape is attached around the plate area. It serves to seal the attachment to the floor and thus improves the extraction performance. The velcro strip can be easily positioned and quickly replaced when it is worn.
Product Details:
Plate diameter: 178 mm
Attachment length: 230 mm
If more handiness and manoeuvrability of the UNICO is required in confined spaces, it can be equipped with this optionally available attachment.
Product Details:
Plate diameter: 178 mm
Attachment length: 105 mm
The fVelcro disc flexible can be used together with sanding paper or sanding screen.
Due to its flexible nature, it dampens the direct, aggressive transmission of force from the machine to the abrasive. This makes the machine noticeably easier to operate and the wood surface is processed much more gently.
There are fewer sanding marks - a much more uniform sanding pattern is the result.
The Velcro disc flexible, which is made of high-quality materials, is extremely durable and guarantees long service life.
Its use is recommended from grit size 80.
• Diameter: 180 mm
• Total thickness: approx. 6 mm
• Material: Velour red / Polyurethane Microcellular green / Velcro mushroom head blue
The PRCD-S serves as residual current protection device. Its use on construction sites is prescribed by the German Trade Association. It is the only mobile protective device that meets the requirements of the German Trade Association.
The PRCD-S
• detects all possible electrical faults,
• cannot be switched on in case of error,
• checks the intact protective conductor functions before switching on and during operation of the machine
• prevents the machine from restarting automatically, e.g. after the elimination of a power failure.
Our cables are reliable, safe and protect the user!
They are approved for construction sites by German VDE (Association for Electrical, Electronic & Information Technologies) and remain extremely flexible even at low temperatures. The plugs and couplings comply with protection class IP 54 (Schuko system) or IP 44 (three-phase current).
The robust cable jacket is extremely abrasion resistant as well as cut and tear proof and does not stain on wooden floor!
Damage to the coloured cable jacket can be detected immediately thanks to the white coloured inner material.
A glow lamp installed in the Schuko coupling only lights up when voltage is present. Therefore, a non-existent power supply can be detected immediately.
LÄGLER® extension cables are available in the following versions:
Cable cross-section: 3 x 1,5 mm²
Cable length: 10 m
Compatible with: LÄGLER®- Edge Sanders
Cable cross-section: 3 x 2,5 mm²
Cable length: 10 m or 20 m
Compatible with: all LÄGLER® Machines (exept machines with three-phase motor)
The following extension cable is available for three-phase motors:
Cable cross-section: 5 x 1,5 mm²
Cable length: 10 m
Compatible with: all LÄGLER® Machines with three-phase motor
The MultiClip additionally seals the dust bag during sanding and protects the environment from dust leakage. It is very easy to handle.