+49 7135 9890 0
info@laegler.com

Accessories for the FLIP

Milling Attachment

The disc of the milling attachment is equipped with diamond cutting edges (PCD). With these accessory rough work at the edge area can be carried out quickly and without much effort.

Residues of felt, foam and plaster as well as lubricating varnish and paint residues on wooden floors can be removed easily with this Milling Attachment.

It can also be used effectively on floorboards. This applies to the removal of various old varnish layers as well as to the treatment of cupped floorboards in the edge area.


The Milling Attachment FLIP® is the perfect complement to the Milling Drum IGEL for HUMMEL® and ELF.

Product Details:
• Milling disc equipped with 8 PCD cutting edges
• Disc diameter: 150 mm
• Attachment length: 155 mm
• Special feature: Balanced milling disc

Video Flyer I Flyer II Applications


Short Attachment FLIP

This attachment is ideal for working on the edge area. Sanding discs can be used both with a solid velcro and for tensioning. The machine is therefore particulary handy and very easy to operate.

There are various attachments available for the FLIP®, which can be exchanged quickly and easily.

Product details:
Plate diameter: 150 mm
Attachment length: 155 mm


Long Attachment FLIP

Due to its length this attachment is particularly suitable for sanding under obstacles (such as radiators, shelves etc.). Sanding discs can be used both with a solid velcro and for tesioning.

There are various attachments available for the FLIP®, which can be exchanged quickly and easily.

Product details:
Plate diameter: 150 mm
Attachment length: 315 mm


Corner Attachment

Finishing the corners of wooden floors is usually very time-consuming. With the FLIP® corner attachment, for which only velcro discs are available, this work can be carried out in a very short time.

There are various attachments available for the FLIP®, which can be exchanged quickly and easily.

Product details:
Plate diameter: 60 mm
Attachment length: 225 mm

Video  Applications


Working Light

Brings light into the darkness!

This accessory for the FLIP® and ELAN illuminates the working area. The surface quality of the wooden floor can be checked while sanding.

The focusable LED lamp is removable and can also be used as a torch independently of the machine.

It is possible to equip the machine with one working lamp.


Pipe Socket for vacuum cleaner

This pipe attachment allows the Lagler FLIP® to attach directly to a external vacuum cleaner or a mobile dust extractor. These ones must be approved for the extraction of dust produced during sanding or milling.

Dimensions on the pipe socket for connecting: 
• Inner diameter 35 mm
• Outside diameter 38 and 40 mm


Extension Cable

Our cables are reliable, safe and protect the user! 
They are approved for construction sites by  German VDE (Association for Electrical, Electronic & Information Technologies) and remain extremely flexible even at low temperatures. The plugs and couplings comply with protection class IP 54 (Schuko system) or IP 44 (three-phase current).

The robust cable jacket is extremely abrasion resistant as well as cut and tear proof and does not stain on wooden floor!

Damage to the coloured cable jacket can be detected immediately thanks to the white coloured inner material.

A glow lamp installed in the Schuko coupling only lights up when voltage is present. Therefore, a non-existent power supply can be detected immediately.

LÄGLER® extension cables are available in the following versions:
Cable cross-section: 3 x 1,5 mm²
Cable length: 10 m
Compatible with: LÄGLER®- Edge Sanders

Cable cross-section: 3 x 2,5 mm²
Cable length: 10 m or 20 m
Compatible with: all LÄGLER® Machines (exept machines with three-phase motor)

The following extension cable is available for three-phase motors:
Cable cross-section: 5 x 1,5 mm²
Cable length: 10 m
Compatible with: all LÄGLER® Machines with three-phase motor


Emptying Fixture

With the emptying device, the dust bag can be emptied quickly and easily into a garbage bag, almost dustfree, even within a room.


Universal Spanner

With this tool all screws on the FLIP® can be loosened or tightened to carry out simple maintenance and repair work.
These are, for example, changing the attachment, adjusting the wall protection roller or replacing the carbon brushes.

In addition, the spanner can be used to adjust the wheel setting to the attachment used.

Welcome to LÄGLER
Set your privacy settings
Marketing

For the provision of our offers, technically necessary cookies are set on this page. Technically unnecessary cookies and tracking mechanisms that enable us to provide you with a better user experience and individualized offers (marketing cookies and tracking mechanisms) are only used if you have given us your prior consent to do so: Read more

 

Revocation
You can revoke your consent given here at any time with effect for the future or now under privacy settings. For more information, please refer to our data protection / legal information.

Welcome to LÄGLER
Here you can customize your privacy settings

Disabling all cookies: If you want to disable all cookies, please go to your browser settings and disable the setting of cookies. Please note that this may affect the functionality of the website.

You can use the checkbox to give us your consent or revoke your consent with effect for the future.

For the provision of our offers, technically necessary cookies are set on this page. Technically unnecessary cookies and tracking mechanisms that enable us to provide you with a better user experience and individualized offers (marketing cookies and tracking mechanisms) are only used if you have given us your prior consent to do so: Read more